Remote Shutdown System

RSD-STICK

Remote Shutdown System

In environments like oil fields, decisions to start and stop actions often need to be initiated remotely from where the action happens. For instance, if a storage-tank battery fills up, oil flowing to the battery must stop to prevent an overflow, but the controlling device making that “decision” (PLC or SignalFire Gateway) may be miles away.

Remote Shutdown — Wirelessly

That’s where SignalFire’s Remote ShutDown System (RSDS), a long-range wireless monitoring and control system, comes in. The RSDS automates this action without the need for long, costly conduit runs, and system components can also be easily relocated as needs evolve.

Safety Built Into Every Node

Our exclusive CommSafe system automatically sets its outputs to a user-configurable safe state if an interruption in wireless communication is detected.

PLC-Based Control, SignalFire Gateway Control, or Stand-Alone

The SignalFire RSDS can be implemented with a PLC monitoring inputs and generating control commands via the SignalFire Gateway and Counter Stick I/O node. Or, in environments where a PLC is not required for other needs, the SignalFire Gateway can monitor inputs and generate control commands autonomously as a stand-alone system.


Remote Switch

The Remote Switch option allows for a standard RSD System to be configured for use as a stand alone system without a Gateway.  Using a simple table based configuration the system can be setup to switch the relay outputs when one (or more) remote nodes reaches a limit.  A typical application is to shut off a well when one or more remote tanks become full.

Features

  • Stand alone system.  No PLC or Gateway required
  • Simple configuration interface
  • Accepts data from all SignalFire remote nodes
  • Two relay outputs
  • Fail Safe capability
  • Range up to 4 miles
  • Small form factor DIN mount relay enclosure
  • Status LED’s

 

WHERE TO BUY? REQUEST A QUOTE

Operating Temp: -40C to 70C
Power: 6-36 VDC, (battery power optional)
Relay Outputs: 2A, 30V, SPDT
Digital Inputs: Dry contact or 30 volts max (push-pull)
Radio Power: 500 mW
Antenna Type: Omnidirectional
Antenna Gain: 5dB
Receive Sensitivity: -105 dBm
Frequency: 902-928 MHz license-free ISM band, FHSS, FCC part 15 compliant
Range: 3+ miles (line of sight)
Internal Diagnostics: Supply voltage, signal strength, error conditions
Safety Rating: Non-insendive, Class 1 Division 2 groups C & D

TitleCategoriesTagsFile TypeLinkhf:doc_categorieshf:doc_tagshf:file_type
Remote Asset ShutdownApplication NoteRSDpdfapplication-notersdpdf
Remote Shut Down (RSD)Datasheet900 MHz, RSDpdfdatasheet900-mhz rsdpdf
Remote Shutdown Application NoteApplication Note900 MHz, RSDpdfapplication-note900-mhz rsdpdf
Remote Shutdown ManualManual900 MHz, RSDpdfmanual900-mhz rsdpdf
Rescue Firmware Update for Stick ProductsApplication NoteModbus, RSDpdfapplication-notemodbus rsdpdf
RSD Control Module 3D Model3D Models, DrawingRSDzip3d-models drawingrsdzip
RSD Control Module Dimensional DrawingDrawing900 MHz, RSDpdfdrawing900-mhz rsdpdf
RSD Stick Remote Switch ManualManual900 MHz, RSDpdfmanual900-mhz rsdpdf

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This is a text block. Click the edit button to change this text.

RSDS-Schematic-PLC

 


 

RSDS-Schematic-GATEWAY


Standalone Remote Switch System