The RANGER Wall Mount supports all of the same options and features of the standard RANGER but housed in an IP68 rated enclosure. The Wall Mount features 2 cord grips for cable entry along with a third PG9 plug that can be replaced with a cord grip for additional I/O. The Wall Mount is perfect for applications requiring an IP68 rating or for those where this form factor provides more convenient mounting options.

SignalFire RANGER

The SignalFire RANGER transmitter is sensor agnostic, connects quickly and easily, and provides power to even the most remote sensor — all without the effort and cost of trenching or cabling. Paired with your existing cloud or the SignalFire Cloud, the RANGER system is the simplest way to access all of your sensor data from one platform. Whether you’re converting an existing system or building a new system, going wireless with SignalFire means you can go live and start accessing your sensor data almost immediately.

Compatible with a wide range of existing technology and powered by a battery that lasts up to 8 years or optional solar panel or DC (external) power source, the RANGER transmitter makes monitoring easier and more affordable. SignalFire’s system requires no trenching or cabling, greatly reducing installation cost and time. Once the RANGER transmitter is connected to your sensor, your system is powered and ready to deliver data directly to the cloud, where you can easily access it from your laptop, PC, or mobile device and start realizing the potential of insight.

SignalFire’s platform with RANGER IoT cellular transmitters integrates the latest in wireless technology, enabling direct connectivity from any sensor to a cloud platform. With ever-changing communication protocols, the SignalFire RANGER platform makes it easy to stay on the forefront of technology. The modular, plug-and-play nature of the system provides flexibility as well as time and cost savings, allowing room for your network to grow and change as you add or change sensors and as wireless technology advances. The RANGER features an expansion module to support additional sensor protocols including HART, Modbus and SDI-12.  The RANGER firmware can also be updated over-the-air to support new features or sensor types creating a future-proof solution.  — so you spend less time in the field and more time in control.

Operating Temp:

-40 to +185°F (-40°C to 85°C)

Humidity:

0% – 100% condensing

Input Power:

• Battery Pack: Four D-cell Lithium Thionyl Chloride, 76AHr
• Optional solar power
• Optional 10-30Vdc input

Input/Output:

Standard:

• 1 Latching Relay Output (2A @ 30Vdc; 0.3A @ 110Vac; 0.5A @ 125Vac). Failsafe & local automation configurable
• 2 Digital Inputs report state, total counts, frequency (2kHz max), volume total with K Factor
• Analog Input (passive or active): 4-20mA, 1-5V, 0.5-2.5V, 0-5V, 0-10V, 0-15V. Configurable for flow totalizing mode
• Provides a configurable 13V or 18V to attached sensor(s). Maximum current of 60mA.

Expansion Module Options:
(one module possible per RANGER)

2AI1DI Module:

• Adds 2 additional analog inputs and 1 additional digital input

Modbus Module:

• Modbus RTU – RS485 up to 8 slaves, 32 total registers (read/write) .96 optional

HART® Module:

• Supports 1-15 HART sensors in multi-drop mode
• Reports 4 process variables, field device status, unique identifier and device tag for each HART device
• Scan and configure HART IDs with the RANGER, separate HART modem not required

SDI-12 Module:

• Monitors and powers one to eight SDI-12 sensors at 13V, 60mA max
• Reads/reports up to 16 measurements
• Supports reading the default measurement and all additional measurements from connected SDI-12 devices

Battery Life:

Up to 8 years

Data Interface:

• LTE CAT M1 / NB-IoT, auto-selectable
• SparkPlug B messaging

Cellular Radio Power:

23dBm

Antenna:

• Integrated Dual LTE & GPS
• Optional External Antenna with SMA Connector

Enclosure:

Industrial polycarbonate UV Rated; IP68

Safety Rating:

Class 1 Division 2 Certified, Groups A, B,C, D. Temperature Code T5. Certified to CSA C22.2 No. 213:2017, Conforms to UL 121201:2017, CE Approved

Electrical Connection:

Pluggable terminal block, 16-30AWG screw terminals

Local Micro-USB Configuration Port

Weight: 2 lbs, 15oz

Estimated Monthly Data Usage:

Check-in interval dependent

• 1 min = 27 MB
• 5 min = 5.4 MB
• 15 min = 1.08 MB
• 60 min = 0.27 MB

Cellular Specifications:

• LTE band support:
  Cat-M1 / NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B20, B25, B26, B28, B66
• Supports 4FF SIM type
• Power saving features: eDRX
• Secure socket using TLS
• PTCRB Certified

Title	Categories	Tags	File Type	Link	hf:doc_categories	hf:doc_tags	hf:file_type
Cloud API Manual	Manual	Cloud, DIN RANGER, LTE-M1 Cellular, Pressure RANGER, RANGER, RANGER Wall Mount, RANGER900	pdf	Download	manual	cloud din-ranger lte-m1-cellular pressure-ranger ranger ranger-wall-mount ranger900	pdf
RANGER Connectivity Options	Datasheet	Cloud, DIN RANGER, Pressure RANGER, RANGER, RANGER Wall Mount, RANGER900	pdf	Download	datasheet	cloud din-ranger pressure-ranger ranger ranger-wall-mount ranger900	pdf
RANGER Tag Guide v0.1.23-DIN	Tag Guide - Archive	DIN RANGER, LTE-M1 Cellular, RANGER Wall Mount	xlsx	Download	tag-guide-archive	din-ranger lte-m1-cellular ranger-wall-mount	xlsx
RANGER Tag Guide v0.1.24-DIN	Tag Guide - Archive	DIN RANGER, LTE-M1 Cellular, RANGER Wall Mount	xlsx	Download	tag-guide-archive	din-ranger lte-m1-cellular ranger-wall-mount	xlsx
RANGER Tag Guide v0.1.26-DIN	Tag Guide - Archive	DIN RANGER, LTE-M1 Cellular, RANGER Wall Mount	xlsx	Download	tag-guide-archive	din-ranger lte-m1-cellular ranger-wall-mount	xlsx
RANGER Wall Mount Datasheet	Datasheet	LTE-M1 Cellular, RANGER Wall Mount	pdf	Download	datasheet	lte-m1-cellular ranger-wall-mount	pdf
RANGER Wall Mount Dimensional Drawing	Drawing	LTE-M1 Cellular, RANGER Wall Mount	pdf	Download	drawing	lte-m1-cellular ranger-wall-mount	pdf
RANGER Wall Mount Manual	Manual	LTE-M1 Cellular, RANGER Wall Mount	pdf	Download	manual	lte-m1-cellular ranger-wall-mount	pdf