-
How do I switch expansion cards?
August 9, 2021With the RANGER powered off install the expansion card on the radio and secure with the supplied nut. The...
-
What connections are available for the Pressure RANGER?
August 9, 202110,000PSI and below are available with a 1/2″ NPT fitting, 15,000PSI is available with a 1/2″ NPT or F250C...
-
What pressure ranges are available for the Pressure RANGER?
August 9, 2021The standard ranges available are 0-2PSI, 0-20PSI, 0-100PSI, 0-500PSI, 0-1000PSI, 0-3000PSI, 0-5000PSI, 0-10000PSI, 0-15000PSI, and 0-20000PSI.
-
Can I use my SignalFire RF products with the RANGER?
August 9, 2021The RANGER900 combines a SignalFire 900MHz Gateway with the RANGER. You can also connect the SignalFire’s Gateway Stick or...
-
Is the RANGER submersible?
August 9, 2021No, the RANGER is not rated to applications where it may become submerged
-
What is a RANGER900?
August 9, 2021The RANGER900 combines a SignalFire 900MHz gateway and the RANGER circuitry into a single enclosure along with a battery...
-
Does the RANGER have an IP rating?
August 9, 2021The RANGER does not have an official enclosure rating, but is rated for outdoor environments and most closely follows...
-
Is the RANGER certified for my country? Where can I check?
August 9, 2021Please visit: https://www.nordicsemi.com/Products/Low-power-cellular-IoT/nRF9160-Certifications to locate your country
-
What certifications does the RANGER have?
August 9, 2021The RANGER is certified as follows: Hazardous locations: Non-Incendive – For use in Class I, Division 2, Groups A,...
-
What power options are available?
August 9, 2021The RANGER can be powered by an internal 4D Lithium Thionyl Chloride high capacity battery pack (the default option),...