News & Events

News

Events

  • SignalFire Introduces the “Hatch Watchdog” Wireless Thief Hatch Sensor for Remote Tank Monitoring

    By on March 23, 2017

    SignalFire has introduced the Hatch Watchdog, a wireless thief hatch sensor that monitors the status of tank hatches to mitigate environmental and safety risks associated with accidental emissions.  When tank hatches – known as thief hatches – remain ajar, they can release vapors into the atmosphere.   Stringent regulations in controlling emissions can result in fines due to leaking tank hatches.  Protecting the environment is also a priority for many companies with green initiatives.

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Wireless Telemetry System Replaces Aging Wired Control System in Monitoring Hydroelectric Dam Levels

    By on March 14, 2017

    The SignalFire Remote Sensing System™ (SRFSS) offered a more secure and robust alternative to an aging wired sensor control system for remote monitoring of hydroelectric dam levels. Previously, a hydrostatic level sensing system consisting of a hard-wired cable measured reservoir water levels of a hydroelectric dam. In determining the amount of available energy and storage volume in the dam, reservoir water level height must be continuously monitored.

    Read more
    SignalFire Wireless Telemetry
  • Signal Fire Remote Monitoring System Offers Safer, Wireless Solution In Monitoring Levels of Acid in Rail Cars

    By on February 2, 2017

    A regeneration facility replaced a manual method of measuring hazardous liquids in rail cars with a Signal Fire Remote Sensing System to increase worker safety. Previously, technicians used a measurement stick to determine the levels of sulfuric acid in rail cars shipped to the site daily by a refinery. Using the stick required tank measurement multiple times a day, exposing workers to acid fumes, posing a risk to their safety and health. As a manual method, tank measurement by stick varied…

    Read more
    SignalFire Wireless Telemetry
  • WellKeeper Specifies SignalFire Remote Sensing System in Wellhead Monitoring Solution

    By on November 21, 2016

    Monitoring tubing and casing pressures from wellheads helps operators optimize well production while gaining a better understanding of long-term performance.  Feedback can also provide valuable information about well safety.  Wellkeeper Inc, a pioneer of reliable and affordable remote monitoring solutions for independent oil and gas operators, is specifying the SignalFire Remote Sensing System in their remote monitoring solutions for tracking tubing and casing pressures in the oil field.

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Introduces Wireless Pressure Scout For Remote Pressure Monitoring and Alarm Applications

    By on September 12, 2016

    SignalFire Wireless Telemetry introduces the Pressure Scout, an intrinsically safe wireless pressure sensor that supports pressure monitoring and alarm reporting as part of the SignalFire Remote Sensing System.  The first in a line of wireless integrated sensors, the Pressure Scout consists of a pressure sensor integrated with a wireless node and internal battery.  The Pressure Scout is a low-cost alternative to conduit-wired or other wireless pressure monitoring solutions.  Ideal applications for the Pressure Scout include well tubing and casing…

    Read more
    SignalFire Wireless Telemetry
  • SignalFire New Firmware Adds AES-128 Encryption to its Wireless Remote Monitoring Product Line For Added Security

    By on August 15, 2016

    Wireless monitoring and control systems must ensure the security of data as it passes from device to device. To provide this high level of data integrity for customers’ critical processes, SignalFire Wireless Telemetry has released a new version of their firmware that includes a suite of advanced security features.

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Telemetry Introduces Wireless Tank Level & Temperature Monitoring Float Stick System for Hazardous (Class 1 Div 1) Locations

    By on July 25, 2016

    SignalFire Wireless Telemetry introduces the Sentinel Float Stick System that serves as a wireless communication link in the remote monitoring and control of tank levels and temperatures for offsite data processing. Consisting of a magnetostrictive level probe with integrated temperature sensors and mated with a SignalFire Sentinel wireless node, the Sentinel Float Stick System creates a wireless connection between a sensor and Gateway where sensor data along with node-diagnostic information is available via a Modbus RTU or TCP interface….

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Wireless Telemetry Names Automation X Engineers As New Rep for Expanding Presence in Canada

    By on June 27, 2016

    SignalFire Wireless Telemetry has contracted manufacturer rep Automation X Engineers (AXE) to represent its wireless remote monitoring and control solutions in Canada throughout the provinces of Ontario and Quebec. With more than 40 years of experience in automation technology, AXE has established a strong reputation as experts in the wireless instrument/ automation industry/market across many industrial verticals in which SignalFire is growing its brand awareness.

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Wireless Telemetry Expands Sales Channel To Market Wireless Remote Monitoring Solutions In New Markets and Territories

    By on June 6, 2016

    SignalFire Wireless Telemetry has contracted four new manufacturer representatives to expand the brand of its wireless remote monitoring and control systems beyond the oil and gas industry to an array of new markets including chemical processing, refineries, downstream oil and gas, power generation, as well as food and beverage. The representative organizations were chosen based on their product expertise and client relationships in key territories that will play a major factor in supporting SignalFire’s growth throughout the country.

    Read more
    SignalFire Wireless Telemetry
  • SignalFire Wireless Telemetry Gains Class 1, Division 2 Certification for Wireless I/O Module and Modbus DIN Mount Gateways

    By on June 2, 2016

    SignalFire Wireless Telemetry announces that its Modbus DIN Mount Gateways and Wireless I/O Modules are now certified to Class 1, Division 2 standards, allowing their use as part of remote monitoring and control systems in harsh environments with the occurrence of explosive gases.

    Read more
    SignalFire Wireless Telemetry

ENTELEC Conference & Expo

  • April 23-25, 2019
  • Houston, TX

ISHM – International School of Hydrocarbon Measurement

  • May 14-16, 2019
  • Norman, OK

ILTA – International Liquid Terminals Association Conference & Tradeshow

  • June 3-5, 2019
  • Houston, TX

DDDP – Data Driven Drilling & Production Conference

  • June 11-12, 2019
  • Houston, TX

Appalachian Gas Measurement Short Course & Tradeshow

  • July 29-August 1, 2019
  • Moon Township, PA

ASGMT – American School of Gas Measurement Technology

  • September 16-19, 2019
  • Houston, TX

Argentina Oil & Gas Expo 2019

  • September 23 – 26, 2019
  • Buenos Aires, Argentina

 

ISA Expo & Chili Cookoff

  • November 7, 2019
  • Houston, TX